subaru forester tail light bulb

Gim Authors

2 min read

·

31-10-2024

5

0

Share

Shining Bright: Replacing Subaru Forester Tail Light Bulbs

Your Subaru Forester is known for its rugged reliability and adventurous spirit, and its tail lights are a crucial part of keeping you and others safe on the road. But just like any other car, those tail lights will eventually need a bulb replacement.

Why Replace Tail Light Bulbs?

• Safety First: A burnt-out tail light can make it difficult for other drivers to see you, especially at night or in low-visibility conditions. This can increase the risk of accidents.
• Legal Requirements: Most states have regulations regarding functional tail lights, and driving with a burnt-out bulb can result in fines.
• Visibility and Confidence: A fully functioning tail light system enhances your visibility and gives you confidence while driving.

Which Bulb Do You Need?

Subaru Foresters use various bulb types depending on the model year. To find the correct bulb, you'll need to consult your owner's manual or check online resources.

Here are some common Subaru Forester tail light bulb types:

• 1157: This is a very common bulb type for tail lights, brake lights, and turn signals.
• 7443: This is a high-power bulb for brake lights, often used in newer Subaru Foresters.
• 3157: Another common bulb for brake lights, typically used in older models.

How to Replace a Subaru Forester Tail Light Bulb

1. Locate the Bulb: Open your trunk and access the tail light assembly. The bulb is usually secured by a plastic cover or housing.
2. Disconnect the Power: Before touching the bulb, disconnect the electrical connector to prevent any shocks.
3. Remove the Old Bulb: Carefully remove the bulb by twisting it counterclockwise.
4. Install the New Bulb: Insert the new bulb and twist it clockwise to secure it in place.
5. Reconnect Power: Reconnect the electrical connector.
6. Test the Bulb: Turn on your tail lights and ensure the new bulb is working correctly.

Tips for Replacing Tail Light Bulbs:

• Use a Quality Bulb: Choose bulbs from reputable brands to ensure longevity and optimal brightness.
• Wear Gloves: Protect your hands from potential cuts or burns while working with the bulbs.
• Be Gentle: Be careful when handling the bulbs to avoid breaking them.
• Don't Overtighten: Ensure the bulb is securely fastened but don't overtighten it.
• Check Other Bulbs: Once you've replaced one bulb, it's a good idea to check the others to see if any are nearing their end of life.

Don't Hesitate:

If you're not comfortable replacing the bulb yourself, take your Forester to a qualified mechanic. It's worth the cost for peace of mind and proper installation.

Keep Your Subaru Forester Shining:

By regularly checking and replacing tail light bulbs, you'll ensure that your Forester's lighting is always in optimal working condition, enhancing safety, visibility, and confidence on the road.